As low as $624.00
Features
SKU | BUN-052 |
---|
SG500 Features
- Wi-Fi Capability
- 2 Year Warranty
- Backlit LCD Screen
- Single Roll Bar To Eliminate Paper Jams
- Aluminum Encoder Strip Which Reduces Dust Accumulation
- Full Ink Cartridges (31 Ml) Included With Initial Purchase
- Deeper Rich Black Coloring
- Unlimited Technical Support Provided By Sawgrass' Technical Support Team
- Performs Its Own Automatic Maintenance Cycle For Trouble-Free Printing
- Maximum Media Size: SG500 - 8.5" X 14"
- Print Speeds
- High Speed (600 x 600 dpi): 15 Seconds
- High Quality (600 x 600 dpi): 29 Seconds
- Adv. Photo (1200 x 600 dpi): 48 Seconds
- Ultra Fine Photo (4800 x 1200 dpi): 6min 40 Seconds
- Ink Set: Siser EasySubli UHD -CMYK
- Maximum Resolution: 4800 x 1200 dpi
- Media Tray: 250 Sheets
- Ink Delivery System: High-Capacity Cartridges
- Options: 100 Sheet Multi-Bypass Tray; (2) 250 Sheet Paper Feed Units
System/Hardware Requirements For Sawgrass Print Manager
- Memory (RAM): 4GB Required, 8GB or greater recommended.
- Processor (CPU): Dual Core CPU, Quad Core or greater recommended.
- 64-bit processor is required. Intel or AMD (Apple M1 supported non-natively through Rosetta integration)
- Available Hard Drive Space: 10GB or greater free.
- Screen Resolution: 1024x768 pixels at 100% zoom or greater.
- Internet Connection: Required to register DesignMate software.
- Windows Operating Systems Supported: Windows 8.1, Windows 10, Windows 11
- Mac Operating Systems Supported: MacOS 10.13 (High Sierra), MacOS 10.14 (Mojave), MacOS 10.15 (Catalina), MacOS 11.x (Big Sur), MacOS 12.x (Monterey), MacOS 13.x (Ventura)
Sawgrass Print Manager & DesignMate Software
- Download Windows Software: Click Here.
- Download Mac Software: Click Here.
- Register DesignMate Software Here: Click Here.
Coupons Included
- $25 Off all digital art.
- 1 coupon per order. Cannot be combined with other coupons or promotions. The entire value of the coupon must be used on a single order.
Resources
- SG500 Key Features PDF
- SG500/SG1000 Printer Manual
- SG500/SG1000 Printer Warranty
- Check the EasySubli FAQ for common questions
Siser EasySubli Vinyl Application Instructions
Application Instructions
- For Use On 100% cotton, Poly/Cotton blends, 100% polyester.
- Print directly on to the EasySubli vinyl.
- Allow the vinyl to dry under a hot heat press plate for 1 minute prior to pressing at 311°F!
- Cut and Weed the excess material.
- Apply the EasySubli Mask to printed image and use squeegee to smooth the mask over the vinyl.
- Pull the mask and vinyl apart so the vinyl is adhered to the mask.
- Place the mask with vinyl on garment.
- Cover the print with a non stick sheet.
- Apply design at 311°F/155°C.
- Use medium pressure for 15 seconds.
- Peel warm.
Washing Instructions
- Wait 24 hours before first wash.
- Washing resistance up to 60˚C, best inside out
- Do not use bleach or other aggressive chemical agents
- Not suitable for dry clean
- Suitable for tumble dryer, synthetic cycle
Siser EasySubli Home Iron Application Instructions
Application Instructions
- For Use On 100% cotton, Poly/Cotton blends, 100% polyester.
- Print directly on to the EasySubli vinyl.
- Allow the vinyl to dry under a hot heat press plate for 1 minute prior to pressing at 311°F!
- Cut and Weed the excess material.
- Apply the EasySubli Mask to printed image and use squeegee to smooth the mask over the vinyl.
- Pull the mask and vinyl apart so the vinyl is adhered to the mask.
- Place the mask with vinyl on garment.
- Cover the print with a non stick sheet.
- Apply design at 311°F/155°C.
- Use medium pressure for 15 seconds.
- Peel warm.
Washing Instructions
- Wait 24 hours before first wash.
- Washing resistance up to 60˚C, best inside out
- Do not use bleach or other aggressive chemical agents
- Not suitable for dry clean
- Suitable for tumble dryer, synthetic cycle
Siser EasySubli for Cricut Cutters
Cutter Settings
- Blade: Standard
- Setting: Iron-on
Siser EasySubli Vinyl for Roland Cutters
Cutter Settings
- Blade: 45°
- Gram Force: 110-120
- Speed: 30 cm/s
Siser EasySubli Vinyl for Silhouette Cutters
Cutter Settings
- Blade: Auto, 3
- Material: Heat Transfer Flocked
- Speed: 8
- Force: 15
Siser EasySubli Vinyl for Graphtec Cutters
Cutter Settings
- Blade: 45°
- Gram Force: 10-12
- Speed: 30 cm/s
Write Your Own Review