The very popular skinny tumbler is now even larger - 30 ounces! Take your hot or cold beverages on the go with this trendy, skinny tumbler. White glossy coating over stainless steel will allow a vibrant full color print with your sublimation ink. The skinny tumbler measures 9" tall and can be printed using a mug press or convection oven. Double-wall stainless steel vacuum insulated tumbler with straw, cleaning brush and lid
Texprint Sublimation Paper On A Skinny Tumbler with Mug Press
Application Instructions
Set temperature to 350 degrees Fahrenheit.
Set timer to 80-100 seconds.
Set Pressure at medium.
Print a mirror image onto Texprint Paper.
Wrap the printed image around product and secure it with heat transfer tape.
Press at 350 degrees F for 80-100 seconds with medium pressure.
If printing a design that wraps around the tumbler, rotate the tumbler and press for another 80-100 seconds.
Remove immediately from press once finished and peel hot. Use caution as the item will be very hot.
Stainless Steel In A Sublimation Oven
Application Instructions
Set upper and lower oven temperature to 365° Fahrenheit
Set oven timer to 6 minutes.
Print a mirror image onto Texprint Paper.
Wrap the printed image around product and secure it with heat transfer tape.
Slip your drinkware into the recommended shrink film sleeve.
Apply heat to the shrink film using a heat gun until the film is tight on the item.
Once the sublimation oven beeps confirming it has reached the appropriate temperature, place your item in
the oven and close the door.
Heat your product for 6 minutes at 365° F
Remove immediately from oven once finished and peel hot. Use caution as the item will be very hot.
*A heat gun is required for irregular shaped drinkware. If printing on products with straight sides like a skinny tumbler, a heat gun is not needed, as the film will shrink with the heat from the oven.
Texprint Sublimation Paper on Stainless Steel with Convection Oven
Application Instructions
Set temperature to 400 degrees Fahrenheit.
Set timer to 5-7 minutes (300-420 seconds).
Print a mirror image onto Texprint Paper.
Wrap the printed image around product and secure with heat transfer tape.
Place the tumbler in a medium vacuum seal bag and tuck the opening of the bag inside the tumbler.
Place tumbler in a convection oven at 400 F for 5-7 minutes.
When complete remove the tumbler from the oven when hot and remove the bag and texprint paper. Use caution as the item with be very hot.
