Puff Application Instructions

Updated 3 years ago by Nathan Reedy

Set temperature at 360-385 degrees Fahrenheit.
Place sweatshirt on top of bottom pad for added pressure.
Set pressure at medium.
Print 6 to 8 seconds.
Peel immediately while hot.
Pull transfer paper from side to side or top to bottom in one, even sweeping motion.
DO NOT drag transfer paper across garment. Dragging transfer paper may cause balance of print to cool before remaining paper is removed. This will cause holes in the ink deposit on garment.
DO NOT touch or rub before removing transfer paper. This will also produce holes in the ink deposit.